How long could your battery run your appliances?

Watts describe power at a moment in time; watt-hours describe energy. Use this estimate to compare energy budgets, then check whether the battery, inverter and charging equipment support your actual loads.

Estimate battery runtime

Enter the specifications and limits for your equipment. The starting values below are illustrative assumptions, not ratings for a particular product.

About 6.8 hours

1,000 Wh × 80% usable × 85% efficiency ÷ 100 W

This assumes a steady load, no charging and the efficiency you entered. Inverter idle consumption, temperature, battery condition and changing loads can reduce runtime. A fridge or pump cycles on and off; use a measured average load for energy planning and check its startup demand separately.

If the manufacturer gives usable energy rather than nominal energy, enter that figure and set usable capacity to 100% to avoid applying the reduction twice. Check the product manual for the allowed discharge range, inverter efficiency and continuous and surge limits. This calculation does not establish electrical compatibility or UPS suitability.

Turn the estimate into a shortlist

Allow for the time between charging opportunities and seasonal solar output. Compare products by usable energy and supported loads, then check their dimensions, charging inputs and included components.